Principal Investigator is bolded, Student Advisees are underscored. 

Journal Publications

In Progress
  • J5. Sakhakarmy, M., Menezes, P., and Jin, Y., 2021, “A Review on Soft Tribology of Hydrogels,” in progress. (Corresponding author)
  • J4. Liu, Y., Zhu, T., Bi, J., Hua, W., Yu, T., Jin, Y., and Zhao, D., 2021, “Effects of Process Conditions on Tensile Strength and Crystallinity of Polymeric Parts Fabricated Using Ultrasonic Vibration-Assisted Injection Molding,” in progress. (Corresponding author)
  • J3. Yang, F., Wan, M., Long, H., Yang, Z., Qin, L., Hua, W., Dong, X., Jin, Y., Wei, Y., and Zhou, W., 2021, “FDM and SLA 3D Printing Technologies: A Review of Methods, Materials, and Biomedical Applications,” in progress. (Corresponding author)
  • J2. Shi, W., Li, H., Mitchell, K., Zhu, T., Jin, Y., and Zhao, D., 2021, “Development of A Novel Biodegradable Cerebral Stent with Excellent Bending Performance,” in progress. (Corresponding author)
  • J1. Zhang, J., Huang, D., Liu, S., Yang, Z., Dong, X., Zhang, H., Huang, W., Zhou, S., Hua, W., Zhou, W., Zheng, W., and Jin, Y., 2021, “Water Soluble Photocurable Carboxymethyl Cellulose Based Bioactive Hydrogels for Digital Light Processing,” in progress. (Corresponding author)
Published:

[2021]

  • J36. Hua, W., Mitchell, K., Raymond, L., Godina, B., Zhao, D., Zhou, W., and Jin, Y., 2021, “Fluid Bath-Assisted 3D Printing for Biomedical Applications: From Pre- to Postprinting Stages”, ACS Biomaterials Science & Engineering, in press. (Corresponding author)
  • J35. Shi, W., Li, H., Mitchell, K., Zhang, C., Zhu, T., Jin, Y., and Zhao, D., 2021, “A Multi-Dimensional Non-Uniform Corrosion Model for Bioabsorbable Metallic Vascular Stents”, Acta Biomaterialia, Vol. 131, pp. 572-580. (Corresponding author)
  • J34. Chen, G., Wang, D., Hua, W., Wu, W., Zhou, W., Jin, Y., and Zheng, W., 2021, “Simulating and Predicting the Part Warping in Fused Deposition Modeling by Thermal–Structural Coupling Analysis”, 3D Printing and Additive Manufacturing, in press. (Corresponding author)
  • J33. Liu, K., Wang, M., Li, H., Zhao, D., and Jin. Y., 2021, “Effect of Characteristic Scale on the Extrudate Swelling Behavior of Polypropylene Melt in a Micro-Extrusion Process,” Polymer Engineering and Science, in press. (Corresponding author
  • J32. Jin, Y., Xiong, R., Antonelli, P. J., Long, C. J., McAleer, C. M., Hickman, J. J., and Huang, Y., 2021, “Nanoclay Suspension-Enabled Extrusion Bioprinting of 3D Soft Structures,” Journal of Manufacturing Science and Engineering, pp. 1-29. (Corresponding author)
  • J31. Sakhakarmy, M., Tian, S., Raymond, L., Xiong, G., Chen, Y., and Jin, Y., 2021, “Printability Study of Self-Supporting Graphene Oxide-Laponite Nanocomposites for 3D Printing Applications,” The International Journal of Advanced Manufacturing Technology, Vol. 114, pp. 343-355. (Corresponding author)
  • J30. Yang, Z., Shan, J., Huang, Y., Dong, X., Zheng, W., Jin, Y., and Zhou, W., 2021, “Preparation and Mechanism of Free-Radical/Cationic Hybrid Photosensitive Resin with High Tensile Strength for Three-Dimensional Printing Applications,” Journal of Applied Polymer Science, Vol. 138, p. 49881. (Corresponding author)
  • J29. Chai, G., Zhang, D., Hua, W., Chen, M., Yin, J., Jin, Y., and Chen, M., 2021, “Theoretical Model of Pediatric Orbital Trapdoor Fractures and Provisional Personalized 3D Printing-Assisted Surgical Solution,” Bioactive Materials, Vol. 6, pp. 559-567.

[2020]

  • J28. Liu, Y., Zhu, T., Bi, J., Hua, W., Yu, T., Jin, Y., and Zhao, D., 2020, “Investigation on Microstructures and Mechanical Properties of Isotactic Polypropylene Parts Fabricated by Different Process Conditions with Different Aging Periods,” Polymers, Vol. 12, p. 2828. (Corresponding author)
  • J27. Jin, G., Hua, W., Wang, K., Xu, C., Bian, J., Dai, G., Qin, P., and Jin, Y., 2020, “Theoretical and Experimental Study on Three-Layered Polymeric Balloon Catheter Processing,” Polymer Engineering & Science, Vol. 60, pp. 3244-3257. (Corresponding author)
  • J26. Wang, H., Zhao, D., Jin, Y., Wang, M., Mukhopadhyay, T., and You, Z., 2020, “Modulation of Multi-Directional Auxeticity in Hybrid Origami Metamaterials,” Applied Materials Today, Vol. 20, p. 100715. 
  • J25. Shi, L., Li, H., Zhu, T., Jin, Y., Wang, H., Yang, J., Zhang, B., and Zhao, D., 2020, “Study on the Bending Behavior of Biodegradable Metal Cerebral Vascular Stents Using Finite Element Analysis,” Journal of Biomechanics, p. 109856.

[2019]

  • J24. Wei, Y., Wang, M., Zhao, D., Li, H., and Jin, Y., 2019, “Structural Design of Mechanical Property for Biodegradable Polymeric Stents,” Advances in Materials Science and Engineering, Vol. 2019.
  • J23. Wang, H., Zhao, D., Jin, Y., Wang, M., You, Z., and Yu, G., 2019, “Study of Collapsed Deformation and Energy Absorption of Polymeric Origami-Based Tubes with Viscoelasticity,” Thin-Walled Structures, Vol. 144, p. 106246.
  • J22. Jin, Y., Song, K., Gellermann, N., and Huang, Y., 2019, “Fumed Silica Suspension for Freeform Fabrication of Hydrophobic Materials,” ACS Applied Materials & Interfaces, Vol. 11, pp. 29207-29217.
  • J21. Zhao, D., Zhou, R., Sun, J., Li, H., and Jin, Y., 2019, “Experimental Study of Polymeric Stent Fabrication Using Home-Made 3D Printing System,” Polymer Engineering & Science, Vol. 59, pp. 1122-1131. (Corresponding author)

[2018]

  • J20. Jin, Y., Chai, W., and Huang, Y., 2018, “Fabrication of Stand-Alone Cell-Laden Collagen Vascular Network Scaffolds Using Fugitive Pattern-Based Printing-then-Casting Approach,” ACS Applied Materials & Interfaces, Vol. 10, pp. 28361-28371.
  • J19. Jin, Y., Shen, Y., Yin, J., Qian, J., and Huang, Y., 2018, “Nanoclay-Based Self-Supporting Responsive Nanocomposite Hydrogels for Printing Applications,” ACS Applied Materials & Interfaces, Vol. 10, pp. 10461-10470. 
  • J18. Jin, Y., Zhao, D., and Huang, Y., 2018, “Study of Extrudability and Standoff Distance Effect during Nanoclay-Enabled Direct Printing,” Bio-Design & Manufacturing, Vol. 1, pp. 123-134.
  • J17. Zhang, Z., Jin, Y., Yin, J., Xu, C., Xiong, R., Christensen, K., Ringeisen, B. R., Chrisey, D. B., and Huang, Y., 2018, “Evaluation of Bioink Printability for Bioprinting Applications,” Applied Physics Reviews, Vol. 5, p. 041304.
  • J16. Zhao, D., Jin, Y., Wang, M., You, Z., and Wang, H., 2018, “Unified Parametric Modeling of Origami-Based Tube,” Thin-Walled Structures, Vol. 133, pp. 226-243.
  • J15. Davis, B., Christensen, K., Jin, Y., and Huang, Y., 2018, “Effects of Printing-Induced Interfaces on Localized Strain within 3D Printed Hydrogel Structures,” Materials Science & Engineering C, Vol. 89, pp. 65-74.

[2017]

  • J14. Jin, Y., Compaan, A., Chai, W., and Huang, Y., 2017, “Functional Nanoclay Suspension for Printing-Then-Solidification of Liquid Materials,” ACS Applied Materials & Interfaces, Vol. 9, pp. 20057-20066.
  • J13. Jin, Y., Liu, C., Chai, W., Compaan, A., and Huang, Y., 2017, “Self-Supporting Nanoclay as Internal Scaffold Material for Direct Printing of Soft Hydrogel Composite Structures in Air,” ACS Applied Materials & Interfaces, Vol. 9, pp. 17456-17465.
  • J12. Jin, Y., Chai, W., and Huang, Y., 2017, “Printability Study of Hydrogel Solution Extrusion in Nanoclay Yield-Stress Bath during Printing-Then-Gelation Biofabrication,” Materials Science & Engineering C, Vol. 80, pp. 313-325.
  • J11. Jin, Y., Zhao, D., and Huang, Y., 2017, “Fabrication of Double-Layered Alginate Capsules Using Coaxial Nozzle,” Journal of Micro- and Nano- Manufacturing, Vol. 5, p. 041007.

[2016]

  • J10. Jin, Y., Compaan, A., Bhatacharjee, T., and Huang, Y., 2016, “Granular Gel Support-Enabled Extrusion of Three-Dimensional Alginate and Cellular Structures,” Biofabrication, Vol. 8, p. 025016-1-12.
  • J9. Tian, H., Zhao, D., Wang, M., and Jin, Y., 2016, “Effect of Die Lip Geometry on Polymer Extrudate Deformation in Complex Small Profile Extrusion,” Journal of Manufacturing Science and Engineering, Vol. 139, p. 061005.
  • J8. Jin, G., Jin, Y., Zhao, D., Dai, G., and Zhang, Q., 2016, “Study on Effects of Die Swell and Extrusion Processes of Polymer Multi-Lumen Micro Tubes on the Design of the Cross-Section of Multi-Lumen Die,” Microsystem Technologies, Vol. 23, pp. 5093-5104.

[2015]

  • J7. Jin, G., Zhao, D., Wang, M., Jin, Y., Tian, H., and Zhang, J., 2015, “Study on Design and Experiments of Extrusion Die for Polypropylene Single-Lumen Micro Tubes,” Microsystem Technologies, Vol. 21, pp. 2495-2503.
  • J6. Tian, H., Zhao, D., Wang, M., Jin, G., and Jin, Y., 2015, “Study on Extrudate Swell of Polypropylene in Double-Lumen Micro Profile Extrusion,” Journal of Materials Processing Technology, Vol. 225, pp. 357-368.

[2014]

  • J5. Zhao, D., Tian, Q., Wang, M., and Jin, Y., 2014, “Study on the Hydrophobic Property of Shark-Skin-Inspired Micro Riblets,” Journal of Bionic Engineering, Vol. 11, pp. 296-302.
  • J4. Jin, G., Wang, M., Zhao, D., Tian, H., and Jin, Y., 2014, “Design and Experiments of Extrusion Die for Polypropylene Five-Lumen Micro Tube,” Journal of Materials Processing Technology, Vol. 214, pp. 50-59.

[2012]

  • J3. Zhao, D., Jin, Y., and Wang, M., 2012, “Study on Viscosity of Polymer Melt Flowing Through Micro Channels Considering the Wall Slip Effect,” Polymer Engineering and Science, Vol. 52, pp. 1806-1814.
  • J2. Zhao, D., Huang, Z., Wang, M., Wang, T., and Jin, Y., 2012, “Vacuum Casting Replication of Micro-Riblets on Shark Skin for Drag-Reducing Applications,” Journal of Materials Processing Technology, Vol. 212, pp. 198-202.

[2011]

  • J1. Zhao, D., Jin, Y., Wang, M., and Song, M., 2011, “Experimental Study and Molecular Dynamics Simulation on Wall Slip in Micro Extrusion Flowing Process,” Journal of Mechanical Engineering Science, Vol. 225, pp. 1175-1190.

Conference Publications

[2020]

  • C5. Jin, Y., Xiong, R., Antonelli, P. J., Long, C. J., McAleer, C. M., Hickman, J. J., and Huang, Y., 2020, “Nanoclay Suspension-Enabled Extrusion Printing of 3D Soft Structures for Biomedical Applications,” ASME 2020 15th International Manufacturing Science and Engineering Conference, p. V001T03A002. (Corresponding author)

[2018]

  • C4. Jiang, W., Jin, Y., Wang, T., Huang, Y., and Wang, G., 2018, “Investigation of Additive Manufacturing Method with Silver Powder and SU-8 Mixed Conductive Ink for 3-D RF Structures,” IEEE MTT-S International Wireless Symposium, pp. 1-3.
  • C3. Jiang, W., Jin, Y., Wang, T., Huang, Y., and Wang, G., 2018, “3D Printed X-Band Yagi-Uda Antenna,” IEEE Radio & Wireless Symposium, pp. 290-292.

[2009]

  • C2. Zhao, D., Jin, Y., Wang, M., Li, K., and Song, M., 2009, “Numerical Simulation and Experimental Study of Polymer Micro Extrusion Flow,” Proceedings of the 2009 IEEE International Conference on Mechatronics and Automation, pp. 3155-3160.
  • C1. Zhao, D., Jin, Y., Wang, M., Sun, X., and Song, M., 2009, “Experimental Study on the Rheological Characteristics of Polymer Melts Under Micro Scale Effect,” Materials Science Forum, Vol. 628, pp. 429-434.

Book Publications

[2020]

  • B1. He, Y., Gao, Q., and Jin, Y., 2020, “Cell Assembling with 3D Bioprinting Techniques,” WILEY, in process.

Journal publications can also be found on Google Scholar:
    https://scholar.google.com/citations?hl=en&user=vc8qpF4AAAAJ

css.php